Hetzner ipv6: Difference between revisions
From TykWiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
With Hetzner IPv6 you get a default gateway that is outside your own subnet. This can be rather frustrating to configure with FreeBSD, so I just use the link-local address of the router instead. | |||
== Using the routers fe80:: address == | |||
<pre> | |||
$ ping6 ff02::2%em0 | |||
PING6(56=40+8+8 bytes) fe80::ea40:f2ff:fe09:be0%em0 --> ff02::2%em0 | |||
16 bytes from fe80::7afe:3dff:fe46:ec8f%em0, icmp_seq=0 hlim=64 time=3.470 ms | |||
16 bytes from fe80::7afe:3dff:fe46:ec8f%em0, icmp_seq=1 hlim=64 time=1.033 ms | |||
^C | |||
--- ff02::2%em0 ping6 statistics --- | |||
2 packets transmitted, 2 packets received, 0.0% packet loss | |||
round-trip min/avg/max/std-dev = 1.033/2.252/3.470/1.218 ms | |||
$ | |||
</pre> | |||
This means I can add the line <code>ipv6_defaultrouter="fe80::7afe:3dff:fe46:ec8f%em0"</code> to <code>/etc/rc.conf</code> and IPv6 works. | |||
== Using static NDP (not recommended) == | |||
This is for rc.conf: | This is for rc.conf: | ||
<pre> | <pre> |
Revision as of 18:00, 23 July 2012
With Hetzner IPv6 you get a default gateway that is outside your own subnet. This can be rather frustrating to configure with FreeBSD, so I just use the link-local address of the router instead.
Using the routers fe80:: address
$ ping6 ff02::2%em0 PING6(56=40+8+8 bytes) fe80::ea40:f2ff:fe09:be0%em0 --> ff02::2%em0 16 bytes from fe80::7afe:3dff:fe46:ec8f%em0, icmp_seq=0 hlim=64 time=3.470 ms 16 bytes from fe80::7afe:3dff:fe46:ec8f%em0, icmp_seq=1 hlim=64 time=1.033 ms ^C --- ff02::2%em0 ping6 statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/std-dev = 1.033/2.252/3.470/1.218 ms $
This means I can add the line ipv6_defaultrouter="fe80::7afe:3dff:fe46:ec8f%em0"
to /etc/rc.conf
and IPv6 works.
Using static NDP (not recommended)
This is for rc.conf:
### v6 extra config due to weird v6 setup at hetzner ipv6_static_routes="gw" ipv6_route_gw="2a01:4f8:141:52a0::1 -iface re0" static_ndp_pairs="gw" static_ndp_gw="2a01:4f8:141:52a0::1 0:26:88:75:e7:95" v6_network_extra_enable="YES"
Replace my values with your ipv6 default gateway's IP and mac address.
You also need two rc.d scripts: /etc/rc.d/static_ndp
(included in base from FreeBSD 9, if you need it find it here). The other script, /usr/local/etc/rc.d/v6_network_extra
is not included in FreeBSD (yet), it looks like this:
#!/bin/sh # # ipv6 tunnels and default router # # PROVIDE: v6_network_extra # REQUIRE: NETWORKING static_ndp # KEYWORD: nojail . /etc/rc.subr name="v6_network_extra" start_cmd="v6_network_extra_start" v6_network_extra_start() { /sbin/route -n add -inet6 default 2a01:4f8:141:52a0::1 /etc/rc.d/static_ndp restart } load_rc_config $name run_rc_command "$1"
Remember to change your default gateway in this script, and remember to chmod +x the script.